This is a FBL version of the GSR260Z SPORTS.
A good mileage brings you a long flight times for a sport flight as well
as a training for F3C.
Great frame layout for easy maintenance and a helical gear offers
improved durability and reduced noise.
A bigger cooling fan and a fan cover provides better cooling efficiency.
With Flybarless head, operability and mobility will improve than before
and you can have stable flights.
SPECS :
-
Overall length : 1,623mm
-
Overall width : 210mm
-
Overall height : 478mm
-
Gross weight : 7,020g or more (with Main rotor blade)
-
Main rotor diameter : 1,785mm (XB810)
-
Tail rotor diameter : 288mm
-
Gear Ratio : 6.77:1:5.18
-
Swash type : 120 CCPM
-
Engine Starting System:Recoil starter /Shaft Starter Engine
-
Tail Drive System:Belt Drive
-
Frame:Duralumin made frame (Upper frame 2mm/Lower frame 3mm thickness)
Items included
-
26cc Gasoline engine G260PUH-1
-
Optional muffler JRM260S
-
Carbon main rotor blades XB810
Additional items required
-
5-Channel or greater helicopter RC system with CCPM and 5 servos
-
3 Axis gyro system (TAGS01 etc.)
-
Servo Horn
* Not necessary if supplied with your radio set.
* Big Horn 3pcs and Super Horn 1pc are included.
-
Radius of 27mm (for CCPM) 3pcs
-
Radius of 14-17mm (for Rudder) 1pc
-
Radius of 12.5mm (for Throttle) 1pc
-
Fuel: Gasoline and Engine oil for two-cycle engine.
(No.55100, Engine oil 1,000cc)
-
Engine starging tool:
Starting rod [No.60227], Starter and Power supply are needed when shaft starter is used.
If you use Fuel pump, please use the one with gasoline resistant.
Tools Required For Assembly
-
Phillips Screwdriver (Large/Small)
-
Nut Driver (Opposite Side:4-12mm)
-
Needle-nose pliers
-
Drills (3mm x 4mm x 6mm)
-
Scissors
-
Hobby knife
-
Scale (25cm or Longer)
-
Quick Drying Glue
-
Epoxy Resin (more than 30 minutes to become hardened)
-
JR Thrust bearing Grease [No.61597]
-
JR Universal Precision Pitch Gauge [No.60326]
-
Diluted Soap Water and Spray (Upon apply decal)
-
Other general tools for assembling the model
