-
Carburetor Settings-
-
Needle Valve: 2-1/2 - 3 turns from fully closed
-
Mixture Control Valve: Rotate until slotted head is flush with carb body. After setting needle valve, rotate mixture control valve approximately 45� clockwise to lean the mixture or 45½ counter- clockwise to richen mixture
-
Displacement: 0.951cu in (15.59cc)
-
Bore: 1.142" (29.0mm)
-
Stroke: 0.929" (23.8mm)
-
Practical RPM: 2,100 - 11,000RPM
-
Power Output: 1.7ps/10,000RPM
-
Weight: 20.88oz (592g)
-
Muffler Weight: 2.05oz (58g)
-
Crankshaft Size: 5/16-24
-
Height from bottom of Mounting Tab to Pushrod Cover: 3.8" (97.5mm)
-
Height from bottom of Crankcase to Pushrod Cover: 4.7" (119mm)
-
Distance from Carburetor to Drive Hub: 4.5" (115.7mm)
-
Distance/Mounting Hole Centers Same Side: 0.98" (25mm)
-
Distance/Mounting Hole Centers Opposite Side: 2" (52mm)
-
Mounting Hole Diameter: 0.16" (4.2mm)
-
Distance from Drive Hub to end of Crankshaft: 1.5" (37.4mm)
-
Distance from Drive Hub to center of Engine: 2.6" (66.5mm)
-
Width at Mounting Tabs: 2.4" (61mm)
-
Width Below Mounting Tabs: 1.7" (42.6mm)
-
Height/Mounting Tab Bottom to center of Needle Valve: 0.70" (17.8mm)