Categories

GOBLIN 380 YELLOW/BLUE (with 380mm Black Line Main Blades)

GOBLIN 380 YELLOW/BLUE (with 380mm Black Line Main Blades)
Brand: GOBLIN
Product Code: SAB-SG381
Availability: Out Of Stock
Price: RM0.00
Qty:  
   - OR -   
Description

SG381 - SAB GOBLIN 380 YELLOW/BLUE (with 380mm Black Line Main Blades)

The Goblin 380 provides incredible performance, reliability and simplicity with the unique and innovative Goblin look you are accustomed to!

http://www.goblin-helicopter.com/shop/imagesdesc/Untitled-11.jpg

http://www.goblin-helicopter.com/shop/imagesdesc/Goblin_380_desc.jpg

General Specifications Electronic Specifications
  • Main rotor diameter : 856 mm 
  • Main blade length : 380mm
  • Tail rotor diameter : 196 mm
  • Tail blade length : 70 mm
  • Main shaft diameter : 8 mm
  • Tail shaft diameter : 5 mm
  • Weight including electronics : 1075 g (excluding batteries).
 
Kit Includes :
  • 21T motor pulley (other motor pulleys available)
  • BL 380 3D mm main blades
  • 70 mm tail blades
  • 2 Battery tray with straps and double tape
  • Cyclic Servos : Micro size 23mm
    • General and 3D flight :  MKS   DS92A+,  Savox SH-0255MG
    • General and Extreme flight :  BK 3001HV,  SAVOX SV-1232MG,  MKS HV93,  MKS DS95
  • Tail Servo : Mini size 35 mm
    • General and 3D flight :  Savox SH-1257MG,  Futaba S9257
    • General and Extreme flight :  BK 5005HV,  MKS HV9780
  • Typical speed controller :
    • General and 3D flight: Kontronik Koby 70, YGE 60 LV, CC Lite 75
    • General and Extreme flight:  Kontronik Koby 90 - Jive 80LV ,  YGE 90 LV,  CC Lite 100
  • Maximum motor size : 41 mm diameter, 41 mm height
    • General and 3D flight: X-Nova 2820-890,  Scorpion HK 3014-900,  Quantum 2820-880
    • General and Extreme flight :   
      • Kontronik Pyro 380-9,  X-Nova 3215-930, 
      • Scorpion HK 3020-1000,  KDE 500XF-950.
  • Battery compartment: 44 x 44 x 130mm
    •  6S 1500/2600 mAh.  For perfect 3D flight 6S-1800 mAh
The following motor pulleys are available:
  • H0501-19-S - 19T Pinion = ratio 6.3:1 
  • H0501-20-S - 20T Pinion = ratio 6:1
  • H0501-21-S - 21T Pinion = ratio 5.7:1 
  • H0501-22-S - 22T Pinion = ratio 5.5:1
  • H0501-23-S - 23T Pinion = ratio 5.2:1
  • H0501-24-S - 24T Pinion = ratio 5:1

All these motor pulleys are for a 5 mm motor shaft.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: