Hitec Servo HS-5485HB Standard Digital Servo Motor (Karbonite Gear)

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.20sec/60° at no load
Operating Speed (6.0V): 0.17sec/60° at no load
Stall Torque (4.8V): 72oz/in. (5.2kg.cm)
Stall Torque (6.0V): 89 oz/in. (6.4kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
Current Drain (6.0V): 9.1mA/idle and 500mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Ball Bearing
Gear Type: Karbonite Gear
Connector Wire Length: 11.81" (300mm)
Dimensions: 1.57" x 0.78"x 1.49" (39.8 x 19.8 x 38mm)
Weight: 1.59oz. (45g)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: