OS MAX 37SZ-H RING

SPECIFICATIONS:

Displacement: 0.37 cu in (6.07cc)

Bore: 0.806 in (20.5mm)

Stroke: 0.725 in (18.4mm)

Practical RPM range: 2000-21,000

Output: 1.4 ps @ 18,000 RPM

Weight: 10.3oz (293g)

Crankshaft Size: 1/4-28

Distance between mounting holes same side: 0.6" (15mm)

Distance between mounting holes opposite side: 1.5" (38mm)

Width including mounting flanges: 1.8" (45mm)

Width neglecting mounting flanges: 1.5" (38mm)

Height/bottom of crankcase to top of cylinder head: 3" (76mm)

Height/bottom mounting flanges to top of cylinder head: 2.4" (61mm)

Distance/center of crankcase to front bearing: 1.8" (46mm)

Distance from backplate to front bearing: 2.6" (67mm)

Distance from backplate to end of crankshaft: 3.7" (94mm)

Low speed needle 1 turn IN from flush with carb body

High speed needle 1.5 turns OUT from closed

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: