OS MAX 46AX II(40K) W/E - 3071 Engine

SPECS:

• Displacement: 0.455 cu in (7.45cc)
• Bore: 0.866 (22mm)
• Stroke: 0.772 (19.6mm)
• Practical RPM: 2000-17000
• Power Output: 1.65PS 1.67HP/16000 RPM
• Weight: 13.3oz (378g) without muffler
• Recommended Propellers: 10.5x6 11x6-8 12x6-7 use 10x6 for break-in
• Crankshaft Size: 1/4-28
• Distance from remote needle to end of crankshaft: 4.7 (119.4mm)
• Distance from center of engine to drive hub: 2.4 (61mm)
• Distance from center of engine to end of crankshaft: 3.4 (87.6mm)
• Distance/crankshaft center to muffler exhaust outlet: 3.9 (100.5mm)
• Height from crankcase bottom to top of cylinder head: 3.3 (85.2mm)
• Height/crankshaft center to top of cylinder head: 2.6 (67.4mm)
• Width including mounting tabs: 2 (50.8mm)
• Width not including mounting tabs: 1.4 (35.6mm)
• Width/mounting hole centers same side: .69 (17.5mm)
• Width/mounting hole centers opposite side: 1.7 (44mm)
• Diameter of muffler body: 1.5 (38.1mm)
• Angle of muffler in relation to engine: 4
• Carburetor Settings;
• Needle Valve: 1 to 2 turns out from closed position
• Low Speed Needle (aka: Mixture Control Valve): Close throttle rotor gradually from the fully opened position until it is just fully closed (do not turn further).
• Screw in the Mixture Control Screw until it stops. Now open the
• Mixture Control Screw approx. one turn.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: