Product Description
-
- * X3 Newly designed CNC main blade grip, with selectable 3 position pitch lever positions for different flight characteristics.
-
- * New side frames upgrade for bigger motor.
-
- * Tail drive design is the same as on the X7, reducing transmission structural components, increasing efficiency and ease of maintenance dramatically.
-
- * New stylishly painted fiberglass canopy design.
Content :
X3L Basic Kit(385L) x 1 set
* Tail Rotor Blade Set(62mm) x 1 set
Specifications :
* Overall Length (with Canopy): 709mm
* Main rotor diameter: 808mm (Main Blades 360mm) 858mm (Main Blades 385mm)
* Main blade length: 360~385 mm
* Overall Height: 212mm
* Overall Width: 87.8mm
* Tail Blade Length: 62 mm
* Tail Rotation Diameter: 164mm
* ESC: Minimum 50A ESC
* LiPo battery: 1300~ 1800 mAh
* BL Motor : 2520 / 3226
* Total weight: 515g ±3% (kit with canopy,w/o all electronics, blades and batteries.)
Required For Operation :
* Transmitter(6-channel or more, helicopter system)
* Receiver(6-channel or more)
* CCPM Servo x3 (#0S2311) / Tail Servo x1(#0S2518)
* LiPo Battery : 3S & 6S
* ESC : 50A+ ESC recommended(#0F1050)
* CF main blades(360~385mm)
* Flybarless System
* 12~13T Pinion Gear
* BL Motor : 2520(#852205) / 3226(#0M1505)
Tools and Equipment for Assembly :
* 1.5 mm Hexagon Screw Driver
* 2 mm Hexagon Screw Driver
* 2.5 mm Hexagon Screw Driver
* Philips Screw Driver
* Lubricant / one-way bearing grease
* Spring calipers, Needle-nosed pliers
* General thread lock
All basic kit does not include a motor , need to purchase optionally .
The available pinions for X3 are as follows (Pinion 12T~13T) with drive gear ratio below:
12T 10.91 : 1 : 5.46
13T 10.07 : 1 : 5.46