GAUI X7 Formula Kit With Halo Main Blade And Tail Blade, Formula Carbon Fiber Tail Boom in Red, GM-480S Brushless Motor(540KV), GAUI Mini VBar
1) Halo 700mm Main Blade & 105mm Tail Blade
 |
*HALO CF Main Blades(700mm) x 1 set Weight : ~ 195g Length : 700mm Thickness : 8.6mm Width : 62mm |
 |
* HALO CF Tail Rotor Blades(105mm) x 1 set |
2) Formula Carbon Fiber Tail Boom in Red :
3) GAUI Mini VBar 5.3 Express :
The Mini VBar is the world’s smallest and lightest 3-axis virtual flybar system.
It is designed to fit most electric helicopters.
Despite its small size, the Mini VBar is equipped with top-quality sensors
and will thus satisfy the highest performance expectations.
Programming is done via a control panel, or via USB using the PC software.
A special feature of the Mini VBar is the option to use it in conjunction with one or two 2.4 GHz satellite
receivers (you may choose from various brands).
This feature renders it unnecessary to use a primary receiver.
It is also possible to connect the Mini VBar to a receiver in the conventional way.
Mini VBar operates with the following satellite receivers: Spektrum, Fasst,
Jeti Duplex.The all new Mini V-Bar can now be used in all electric model helicopters
with only a few limitations: Do not use the Mini V-Bar in the following types of helicopters:
- Scale helicopters
- Helicopters with multi-bladed rotor-heads (3+ blades)
- Custom built helicopters.
3-Axis Gyro System
Dimensions : 28 x 37 x 13 mm
Weight : 11 g
Content of MinVBar set : Mini VBar with 5.3 Express-Firmware and PC-Software Version 5.3, USB cable
(patch cable, satellite receivers and control panel are not included)
| Stator Diameter | 45 mm (1.77 in) |
| Stator Thickness | 30 mm (1.18 in) |
| No. of Stator Arms | 12 |
| No. of Stator Poles | 10 |
| Motor Wind | 9 Turn Wye |
| Motor Wire | 1-Strand 1.5 mm |
| Motor Kv | 540KV RPM/Volt |
| No-Load Current (Io/10V) | 2.11 Amps |
| Motor Resistance (RM) | 0.010 Ohms |
| Max Continuous Current | 115 Amps |
| Max Continuous Power | 4800 Watts |
| Weight | 565 Grams (17.25 oz) |
| Outside Diameter | 56.7 mm (2.23 in) |
| Shaft Diameter | 5.98 mm (0.24 in) |
| Body Length | 60.6 mm (2.39 in) |
| Overall Shaft Length | 100.0 mm (3.94 in) |
| Max Lipo Cell | 12s |
| Max Peak Current | 250A (2 seconds) |
| Max Peak Power | 11000 Watts (2 seconds) |
| Motor Timing | 5deg to 15 deg |
| Drive Frequency | 8kHz |
